Blame - docs/0.8.8-incubating/install.html - incubator-asterixdb-site

<p>This is a quickstart guide for getting AsterixDB running in a distributed environment. This guide also introduces the AsterixDB installer (nicknamed <i><i>Managix</i></i>) and describes how it can be used to create and manage an AsterixDB instance. By following the simple steps described in this guide, you will get a running instance of AsterixDB. You shall be able to use AsterixDB from its Web interface and manage its lifecycle using Managix. This document assumes that you are running some version of <i><i>Linux</i></i> or <i><i>MacOS X</i></i>.</p></div>

225

226

<h2><a name="Prerequisites_for_Installing_AsterixDB_Back_to_TOC"></a><a name="PrerequisitesForInstallingAsterixDB" id="PrerequisitesForInstallingAsterixDB">Prerequisites for Installing AsterixDB</a> <font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

<p>Prerequisite:</p>

<ul>

<li><a class="externalLink" href="http://www.oracle.com/technetwork/java/javase/downloads/index.html">JDK>=7</a> (Otherwise known as JDK>=1.7).</li>

232

</ul>

233

<p>To know the version of Java installed on your system, execute the following:</p>

<pre> $ java -version

238

</pre></div></div>

239

<p>If your version is at least 1.7.0_x, similar to the output shown below, you are good to proceed.</p>

<pre> java version "1.7.0_13"

244

Java(TM) SE Runtime Environment (build 1.7.0_13-b20)

245

Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)

246

</pre></div></div>

247

<p>If you need to upgrade or install java, please follow the instructions below.</p>

<ul>

<li>

<p>For Linux: <a class="externalLink" href="http://docs.oracle.com/javase/7/docs/webnotes/install/linux/linux-jdk.html">JDK 7 Linux Install</a> JDK would be installed at a path under /usr/lib/jvm/jdk-version .</p></li>

253

254

<li>

255

<p>For Mac: <a class="externalLink" href="http://docs.oracle.com/javase/7/docs/webnotes/install/mac/mac-jdk.html">JDK 7 Mac Install</a> JDK would be installed at /Library/Java/JavaVirtualMachines/jdk-version/Contents/Home .</p></li>

256

</ul>

257

<p>The java installation directory is referred as JAVA_HOME. Since we upgraded/installed Java, we need to ensure JAVA_HOME points to the installation directory of JDK. Modify your ~/.bash_profile (or ~/.bashrc) and define JAVA_HOME accordingly. After the modification, execute the following:</p>

<pre> $ java -version

262

</pre></div></div>

263

<p>If the version information you obtain does not show 1.7, you need to update the PATH variable. To do so, execute the following:</p>

<pre> $ echo "PATH=$JAVA_HOME/bin:$PATH" >> ~/.bash_profile (or ~/.bashrc)

268

$ source ~/.bash_profile (or ~/.bashrc)

269

</pre></div></div></div>

270

271

<h2><a name="Section_1:_Single-Machine_AsterixDB_installation_Back_to_TOC"></a><a name="Section1SingleMachineAsterixDBInstallation" id="Section1SingleMachineAsterixDBInstallation">Section 1: Single-Machine AsterixDB installation</a> <font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

272

<p>We assume a user called “Joe” with a home directory as /home/joe. On a Mac, the home directory for user Joe would be /Users/joe.</p>

273

274

<h3><a name="Configuring_Environment"></a>Configuring Environment</h3>

275

<p>Ensure that JAVA_HOME variable is defined and points to the the java installation directory on your machine. To verify, execute the following:</p>

<pre> $ echo $JAVA_HOME

280

</pre></div></div>

281

<p>If you do not see any output, JAVA_HOME is not defined. We need to add the following line to your profile located at /home/joe/.bash_profile or /home/joe/.bashrc, whichever you are using. If you do not have any of these files, create a ~/.bash_profile file.</p>

<pre> export JAVA_HOME=<Path to Java installation directory>

286

</pre></div></div>

287

<p>After you have edited ~/.bash_profile (or ~/.bashrc), execute the following to make the changes effective in current shell:</p>

<pre> $ source /home/joe/.bash_profile (or /home/joe/.bashrc)

292

</pre></div></div>

293

<p>Before proceeding, verify that JAVA_HOME is defined by executing the following:</p>

<pre> $ echo $JAVA_HOME

298

</pre></div></div></div>

299

300

<h3><a name="Configuring_SSH"></a>Configuring SSH</h3>

301

<p>If SSH is not enabled on your system, please follow the instruction below to enable/install it or else skip to the section <a href="#Configuring_Password-less_SSH">Configuring Password-less SSH</a>.</p>

302

303

<h4><a name="Enabling_SSH_on_Mac"></a>Enabling SSH on Mac</h4>

304

<p>The Apple Mac OS X operating system has SSH installed by default but the SSH daemon is not enabled. This means you can’t login remotely or do remote copies until you enable it. To enable it, go to ‘System Preferences’. Under ‘Internet & Networking’ there is a ‘Sharing’ icon. Run that. In the list that appears, check the ‘Remote Login’ option. Also check the “All users” radio button for “Allow access for”. This starts the SSH daemon immediately and you can remotely login using your username. The ‘Sharing’ window shows at the bottom the name and IP address to use. You can also find this out using ‘whoami’ and ‘ifconfig’ from the Terminal application.</p></div>

305

306

<h4><a name="Enabling_SSH_on_Linux"></a>Enabling SSH on Linux</h4>

<pre> sudo apt-get install openssh-server

311

</pre></div></div>

312

<p>Assumming that you have enabled SSH on your system, let us proceed.</p></div>

313

314

<h4><a name="Configuring_Password-less_SSH"></a>Configuring Password-less SSH</h4>

315

<p>For our single-machine setup of AsterixDB, we need to configure password-less SSH access to localhost. We assume that you are on the machine where you want to install AsterixDB. To verify if you already have password-less SSH configured, execute the following:</p>

<pre> $ ssh 127.0.0.1

320

</pre></div></div>

321

<p>If you get an output similar to one shown below, type “yes” and press enter.</p>

<pre> The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.

326

RSA key fingerprint is aa:7b:51:90:74:39:c4:f6:28:a2:9d:47:c2:8d:33:31.

327

Are you sure you want to continue connecting (yes/no)?

328

</pre></div></div>

329

<p>If you are not prompted for a password, that is if you get an output similar to one shown below, it signifies that you already have password-less SSH configured. </p>

<pre> $ ssh 127.0.0.1

334

Last login: Sat Mar 23 22:52:49 2013

335

</pre></div></div>

336

<p>[Important: Password-less SSH requires the use of a (public,private) key-pair. The key-pair is located as a pair of files under $HOME/.ssh directory. It is required that the (public,private) key-pair files have default names (id_rsa.pub, id_rsa) respectively. If you are using different names, please rename the files to use the default names]</p>

337

<p>Skip to the next section <a href="#Configuring_Managix">Configuring Managix</a>.</p>

338

<p>You are here because you were prompted for a password. You need to configure password-less SSH.<br />We shall generate a (public,private) key-pair as id_rsa.pub and id_rsa respectively. If $HOME/.ssh already contains a (public,private) key-pair, please ensure the files are renamed before proceeding. Follow the instructions below.</p>

<pre> $ ssh-keygen -t rsa -P ""

343

Generating public/private rsa key pair.

344

Enter file in which to save the key (/home/joe/.ssh/id_rsa):

345

[Important: Please ensure that we use the default value, so simply press enter]

346

</pre></div></div>

347

<p>If a key already exists, you should get an output similar to what is shown below. Press ‘y’ to overwrite the existing key. It is required to use the default name. If you wish to not overwrite a pre-existing key, ensure that the pre-existing key is saved with a different name.</p>

<pre> /home/joe/.ssh/id_rsa already exists.

352

Overwrite (y/n)?

353

</pre></div></div>

354

<p>You should see an output similar to one shown below:</p>

<pre> The key fingerprint is:

359

4d:b0:30:14:45:cc:99:86:15:48:17:0b:39:a0:05:ca joe@joe-machine

360

The key's randomart image is:

+--[ RSA 2048]----+

| ..o+B@O= |

|.. o ==*+ |

|.E. oo . |

| o |

| S . |

| |

| |

| |

| |

+-----------------+

</pre></div></div>

<p>Note: for Linux users, you may not get an image representation of the key, but this is not an error. Next, execute the following:</p>

<pre> $ cat $HOME/.ssh/id_rsa.pub >> $HOME/.ssh/authorized_keys

378

$ chmod 700 $HOME/.ssh/authorized_keys

379

</pre></div></div>

380

<p>We shall now retry SSH without password.</p>

<pre> $ ssh 127.0.0.1

385

</pre></div></div>

386

<p>You may see an output similar to one shown below:</p>

<pre> The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.

391

RSA key fingerprint is aa:7b:51:90:74:39:c4:f6:28:a2:9d:47:c2:8d:33:31.

392

Are you sure you want to continue connecting (yes/no)?

393

</pre></div></div>

394

<p>Type ‘yes’ and press the enter key. You should see an output similar to one shown below:</p>

<pre> Warning: Permanently added '127.0.0.1' (RSA) to the list of known hosts.

399

Last login: Thu Mar 28 12:27:10 2013

400

</pre></div></div>

401

<p>You should now be able to log in without being prompted for a password or a response.</p>

<pre> ssh 127.0.0.1

Last login: Sat Mar 23 22:54:40 2013

407

</pre></div></div>

408

<p>Execute ‘exit’ to close the session.</p>

<pre> $ exit

logout

Connection to 127.0.0.1 closed.

415

</pre></div></div></div></div>

416

417

<h3><a name="Configuring_Managix"></a>Configuring Managix</h3>

Ian Maxon

b0e7b1f

2017-01-17 15:17:34 -0800

[diff] [blame]

418

<p>You will need the AsterixDB installer (a.k.a. Managix). Download Managix from <a class="externalLink" href="https://asterixdb.apache.org/download.html">here</a>; this includes the bits for Managix as well as AsterixDB.</p>

Yingyi Bu

08953b2

2016-03-25 15:23:26 -0700

[diff] [blame]

419

<p>To be able to create an AsterixDB instance and manage its lifecycle, the Managix requires you to configure a set of configuration files namely:</p>

<ul>

<li><tt>conf/managix-conf.xml</tt>: A configuration XML file that contains configuration settings for Managix.</li>

424

425

<li>A configuration XML file that describes the nodes in the cluster, e.g., <tt>clusters/local/local.xml</tt>.</li>

426

</ul>

427

<p>Since we intend to run AsterixDB on a single node, Managix can auto-configure itself and populate the above configuration files. To auto-configure Managix, execute the following in the MANAGIX_HOME directory:</p>

<pre> /home/joe/asterix-mgmt> $ managix configure

432

</pre></div></div>

433

<p>Let us do a sample run to validate the set of configuration files auto-generated by Managix.</p>

<pre> /home/joe/asterix-mgmt> $ managix validate

438

INFO: Environment [OK]

439

INFO: Managix Configuration [OK]

440

441

442

/home/joe/asterix-mgmt> $ managix validate -c clusters/local/local.xml

443

INFO: Environment [OK]

444

INFO: Cluster configuration [OK]

445

</pre></div></div></div>

446

447

<h3><a name="Creating_an_AsterixDB_instance"></a>Creating an AsterixDB instance</h3>

448

<p>Now that we have configured Managix, we shall next create an AsterixDB instance. An AsterixDB instance is identified by a unique name and is created using the <tt>create</tt> command. The usage description for the <tt>create</tt> command can be obtained by executing the following:</p>

<pre> $ managix help -cmd create

453

Creates an AsterixDB instance with a specified name. Post creation, the instance is in ACTIVE state,

454

indicating its availability for executing statements/queries.

455

Usage arguments/options:

456

-n Name of the AsterixDB instance.

457

-c Path to the cluster configuration file

458

</pre></div></div>

459

<p>We shall now use the <tt>create</tt> command to create an AsterixDB instance by the name “my_asterix”. In doing so, we shall use the cluster configuration file that was auto-generated by Managix.</p>

<pre> $ managix create -n my_asterix -c clusters/local/local.xml

464

</pre></div></div>

465

<p>A sample output of the above command is shown below:</p>

<pre> INFO: Name:my_asterix

470

Created:Thu Mar 07 11:14:13 PST 2013

471

Web-Url:http://127.0.0.1:19001

472

State:ACTIVE

473

</pre></div></div>

474

<p>The third line above shows the web-url <a class="externalLink" href="http://127.0.0.1:19001">http://127.0.0.1:19001</a> for an AsterixDB’s web interface. The AsterixDB instance is in the ‘ACTIVE’ state, indicating that you may access the web interface by navigating to the web url.</p>

475

<p>Type in the following “Hello World” query in the box:</p>

<pre> let $message := 'Hello World!'

480

return $message

481

</pre></div></div>

482

<p>Press the “Run” button. If the query result shows on the output box, then Congratulations! You have successfully created an AsterixDB instance!</p></div></div>

483

484

<h2><a name="Section_2:_Single-Machine_AsterixDB_installation_Advanced_Back_to_TOC"></a><a name="Section2SingleMachineAsterixDBInstallationAdvanced" id="Section2SingleMachineAsterixDBInstallationAdvanced">Section 2: Single-Machine AsterixDB installation (Advanced)</a> <font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

485

<p>We assume that you have successfully completed the single-machine AsterixDB installation by following the instructions above in section <a href="#Section_1:_Single-Machine_AsterixDB_installation">AsterixDB installation</a>. In this section, we shall cover advanced topics related to AsterixDB configuration. Before we proceed, it is imperative to go through some preliminary concepts related to AsterixDB runtime.</p>

486

487

<h3><a name="AsterixDB_Runtime"></a>AsterixDB Runtime</h3>

488

<p>An AsterixDB runtime comprises of a ‘‘master node’’ and a set of ‘‘worker nodes’’, each identified by a unique id. The master node runs a ‘‘Cluster Controller’’ service (a.k.a. ‘‘CC’’), while each worker node runs a ‘‘Node Controller’’ service (a.k.a. ‘‘NC’’). Please note that a node in an AsterixDB cluster is a logical concept in the sense that multiple nodes may map to a single physical machine, which is the case for a single-machine AsterixDB installation. This association or mapping between an AsterixDB node and a physical machine is captured in a cluster configuration XML file. In addition, the XML file contains properties and parameters associated with each node.</p>

489

490

<h4><a name="AsterixDB_Runtime_Configuration"></a>AsterixDB Runtime Configuration</h4>

491

<p>As observed earlier, Managix can auto-configure itself for a single-machine setup. As part of auto-configuration, Managix generated the cluster XML file. Let us understand the components of the generated cluster XML file. If you have configured Managix (via the <tt>configure</tt> command), you can find a similar cluster XML file as $MANAGIX_HOME/clusters/local/local.xml. The following is a sample XML file generated on a Ubuntu (Linux) setup:</p>

<name>local</name>

<java_home>/usr/lib/jvm/jdk1.7.0</java_home>

499

<log_dir>/home/joe/asterix-mgmt/clusters/local/working_dir/logs</log_dir>

500

<txn_log_dir>/home/joe/asterix-mgmt/clusters/local/working_dir/logs</txn_log_dir>

501

<iodevices>/home/joe/asterix-mgmt/clusters/local/working_dir</iodevices>

502

<store>storage</store>

503

<working_dir>

504

<dir>/home/joe/asterix-mgmt/clusters/local/working_dir</dir>

</working_dir>

<master_node>

<id>master</id>

<client_ip>127.0.0.1</client_ip>

510

<cluster_ip>127.0.0.1</cluster_ip>

511

<client_port>1098</client_port>

512

<cluster_port>1099</cluster_port>

513

<http_port>8888</http_port>

</master_node>

<node>

<cluster_ip>127.0.0.1</cluster_ip>

</node>

</cluster>

</pre></div></div>

<p>We shall next explain the components of the cluster configuration XML file.</p></div>

522

523

<h4><a name="a1_Defining_nodes_in_AsterixDB_runtime"></a>(1) Defining nodes in AsterixDB runtime</h4>

524

<p>The single-machine AsterixDB instance configuration that is auto-generated by Managix (using the <tt>configure</tt> command) involves a master node (CC) and a worker node (NC). Each node is assigned a unique id and provided with an ip address (called ‘‘cluster_ip’’) that maps a node to a physical machine. The following snippet from the above XML file captures the master/worker nodes in our AsterixDB installation.</p>

<id>master</id>

<client_ip>127.0.0.1</client_ip>

531

<cluster_ip>127.0.0.1</cluster_ip>

532

<client_port>1098</client_port>

533

<cluster_port>1099</cluster_port>

534

<http_port>8888</http_port>

</master_node>

<node>

<cluster_ip>127.0.0.1</cluster_ip>

539

</node>

540

</pre></div></div>

541

<p>The following is a description of the different elements in the cluster configuration xml file.</p>

<td>Property</td>

<td>Description</td>

</tr>

<td>A unique id for a node.</td>

</tr>

<td>cluster_ip</td>

<td>IP address of the machine to which a node maps to. This address is used for all internal communication between the nodes.</td>

</tr>

<td>client_ip</td>

<td>Provided for the master node. This IP should be reachable from clients that want to connect with AsterixDB via its web interface.</td>

</tr>

<td>client_port</td>

<td>Provided for the master node. This is the port at which the Cluster Controller (CC) service listens for connections from clients.</td>

</tr>

<td>cluster_port</td>

583

584

<td>Provided for the master node. This is the port used by the Cluster Controller (CC) service to listen for connections from Node Controllers (NCs). </td>

</tr>

<td>Provided for the master node. This is the http port used by the Cluster Controller (CC) service. </td>

</tr>

</table></div>

<h4><a name="a2_Properties_associated_with_a_worker_node_NC_in_AsterixDB"></a>(2) Properties associated with a worker node (NC) in AsterixDB</h4>

597

<p>The following is a list of properties associated with each worker node in an AsterixDB configuration.</p>

<td>Property</td>

<td>Description</td>

</tr>

<td>Java installation directory at each node.</td>

</tr>

<td>A directory where the worker node JVM may write logs.</td>

</tr>

<td>A directory where the worker node writes transaction logs.</td>

</tr>

<td>iodevices</td>

<td>Comma separated list of IO Device mount points.</td>

</tr>

<td>store</td>

<td>A data directory (under each iodevice) that AsterixDB uses to store data belonging to dataset(s).</td>

641

</tr>

642

</table>

643

<p>All the above properties can be defined at the global level or a local level. In the former case, these properties apply to all the nodes in an AsterixDB configuration. In the latter case, these properties apply only to the node(s) under which they are defined. A property defined at the local level overrides the definition at the global level.</p></div>

644

645

<h4><a name="a3_Working_directory_of_an_AsterixDB_instance"></a>(3) Working directory of an AsterixDB instance</h4>

646

<p>Next we explain the following setting in the file $MANAGIX_HOME/clusters/local/local.xml.</p>

<dir>/Users/joe/asterix-mgmt/clusters/local/working_dir</dir>

</working_dir>

</pre></div></div>

<p>Managix associates a working directory with an AsterixDB instance and uses this directory for transferring binaries to each node. If there is a directory that is readable by each node, Managix can use it to place binaries that can be accessed and used by all the nodes in the AsterixDB set up. A network file system (NFS) provides such a functionality for a cluster of physical machines so that a path on NFS is accessible from each machine in the cluster. In the single-machine set up described above, all nodes correspond to a single physical machine. Each path on the local file system is accessible to all the nodes in the AsterixDB setup and the boolean value for NFS above is thus set to <tt>true</tt>.</p></div></div>

656

657

<h3><a name="Managix_Configuration"></a>Managix Configuration</h3>

658

<p>Managix allows creation and management of multiple AsterixDB instances and uses Zookeeper as its back-end database to keep track of information related to each instance. We need to provide a set of one or more hosts that Managix can use to run a Zookeeper instance. Zookeeper runs as a daemon process on each of the specified hosts. At each host, Zookeeper stores data under the Zookeeper home directory specified as part of the configuration. The following is an example configuration <tt>$MANAGIX_HOME/conf/managix-conf.xml</tt> that has Zookeeper running on the localhost (127.0.0.1) :</p>

<homeDir>/home/joe/asterix/.installer/zookeeper</homeDir>

</servers>

</zookeeper>

</configuration>

</pre></div></div>

<p>It is possible to have a single host for Zookeeper. A larger number of hosts would use Zookeeper’s replication and fault-tolerance feature such that a failure of a host running Zookeeper would not result in loss of information about existing AsterixDB instances.</p></div></div>

674

675

<h2><a name="Section_3:_Installing_AsterixDB_on_a_Cluster_of_Multiple_MachinesBack_to_TOC"></a><a name="Section3InstallingAsterixDBOnAClusterOfMultipleMachines" id="Section3InstallingAsterixDBOnAClusterOfMultipleMachines">Section 3: Installing AsterixDB on a Cluster of Multiple Machines</a><font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

676

<p>We assume that you have read the two sections above on single-machine AsterixDB setup. Next we explain how to install AsterixDB in a cluster of multiple machines. As an example, we assume we want to setup AsterixDB on a cluster of three machines, in which we use one machine (called machine A) as the master node and two other machines (called machine B and machine C) as the worker nodes, as shown in the following diagram:</p>

677

678

<p>Notice that each machine has a ‘‘cluster_ip’’ address, which is used by these machines for their intra-cluster communication. Meanwhile, the master machine also has a ‘‘client_ip’’ address, using which an end-user outside the cluster can communicate with this machine. The reason we differentiate between these two types of IP addresses is that we can have a cluster of machines using a private network. In this case they have internal ip addresses that cannot be used outside the network. In the case all the machines are on a public network, the “client_ip” and “cluster_ip” of the master machine can share the same address.</p>

679

<p>Next we describe how to set up AsterixDB in this cluster, assuming no Managix has been installed on these machines.</p>

680

681

<h3><a name="Step_1:_Configure_SSH"></a>Step (1): Configure SSH</h3>

682

<p>The steps of setting up SSH are similar to those in the single-machine setup case. We assume we have a common user account called “joe” on each machine in the cluster.</p>

683

<p>On the master machine, do the following:</p>

<pre> machineA> ssh 127.0.0.1

688

</pre></div></div>

689

<p>If you get an output similar to one shown below, type “yes” and press enter.</p>

<pre> The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.

694

RSA key fingerprint is aa:7b:51:90:74:39:c4:f6:28:a2:9d:47:c2:8d:33:31.

695

Are you sure you want to continue connecting (yes/no)?

696

</pre></div></div>

697

<p>If you are not prompted for a password, that is if you get an output similar to one shown below, it signifies that you already have password-less SSH configured. </p>

<pre> $ ssh 127.0.0.1

702

Last login: Sat Mar 23 22:52:49 2013

703

</pre></div></div>

704

<p>[Important: Password-less SSH requires the use of a (public,private) key-pair. The key-pair is located as a pair of files under $HOME/.ssh directory. It is required that the (public,private) key-pair files have default names (id_rsa.pub, id_rsa) respectively. If you are using different names, please rename the files to use the default names]</p>

705

<p>If you are prompted for a password, execute the following</p>

<pre> machineA> ssh-keygen -t rsa -P ""

710

machineA> cat $HOME/.ssh/id_rsa.pub >> $HOME/.ssh/authorized_keys

711

machineA> chmod 700 $HOME/.ssh/authorized_keys

712

</pre></div></div>

713

<p>If $HOME is not on the NFS, copy the id_rsa.pub to the directory ~/.ssh (login with the same account) on each machine, and then do the following on each machine. (Notice that this step is not needed if the folder “.ssh” is on the NFS and can be accessed by all the nodes.)</p>

<pre> cd ~/.ssh

cat id_rsa.pub >> authorized_keys

719

chmod 700 $HOME/.ssh/authorized_keys

720

</pre></div></div>

721

<p>Then run the following step again and type “yes” if prompted:</p>

<pre> machineA> ssh 127.0.0.1

726

</pre></div></div></div>

727

728

<h3><a name="Step_2:_Define_the_AsterixDB_cluster"></a>Step (2): Define the AsterixDB cluster</h3>

Ian Maxon

b0e7b1f

2017-01-17 15:17:34 -0800

[diff] [blame]

729

<p>We first log into the master machine as the user “joe”. On this machine, download Managix from <a class="externalLink" href="https://asterixdb.apache.org/download.html">here</a> (save as above), then do the following steps similar to the single-machine case described above:</p>

Yingyi Bu

08953b2

2016-03-25 15:23:26 -0700

[diff] [blame]

<pre> machineA> cd ~

machineA> mkdir asterix-mgmt

735

machineA> cd asterix-mgmt

736

machineA> unzip <path to the Managix zip bundle>

737

</pre></div></div>

738

<p>Note that it is recommended that MANAGIX_HOME is not located on a network file system (NFS). Managix creates artifacts/logs that are not required to be shared. Any overhead associated with creating artifacts/logs on the NFS should be avoided.</p>

739

<p>We also need an AsterixDB configuration XML file for the cluster. We give the name to the cluster, say, “rainbow”. We create a folder for the configuration of this cluster:</p>

<pre> machineA> mkdir asterix-mgmt/rainbow_cluster

744

</pre></div></div>

745

<p>For this cluster we create a configuration file <tt>$MANAGIX_HOME/rainbow_cluster/rainbow.xml</tt>. The following is a sample file with explanation of the properties:</p>

752

<name>rainbow</name>

753

754

755

756

757

<!-- The working directory of Managix. It is recommended for the working

758

directory to be on a network file system (NFS) that can accessed by

759

all machines.

760

Managix creates the directory if it it doesn't exist. -->

761

<working_dir>

762

<dir>/home/joe/managix-workingDir</dir>

</working_dir>

<!-- Directory for Asterix to store worker logs information for each machine.

767

Needs to be on the local file system of each machine.

768

Managix creates the directory if it doesn't exist.

769

This property can be overriden for a node by redefining at the node level. -->

770

<log_dir>/mnt/joe/logs</log_dir>

771

772

<!-- Directory for Asterix to store transaction log information for each machine.

773

Needs to be on the local file system of each machine.

774

Managix creates the directory if it doesn't exist.

775

This property can be overriden for a node by redefining at the node level. -->

776

<txn_log_dir>/mnt/joe/txn_logs</txn_log_dir>

777

778

<!-- Mount point of an iodevice. Use a comma separated list for a machine that

779

has multiple iodevices (disks).

780

This property can be overriden for a node by redefining at the node level. -->

781

782

783

784

<store>storage</store>

785

786

787

<java_home>/usr/lib/jvm/jdk1.7.0</java_home>

788

789

790

<master_node>

791

<id>master</id>

792

<client_ip>128.195.52.177</client_ip>

793

<cluster_ip>192.168.100.0</cluster_ip>

794

<client_port>1098</client_port>

795

<cluster_port>1099</cluster_port>

796

<http_port>8888</http_port>

797

</master_node>

798

799

800

<node>

801

<id>nodeB</id>

802

<cluster_ip>192.168.100.1</cluster_ip>

803

</node>

804

805

806

<node>

807

<id>nodeC</id>

808

<cluster_ip>192.168.100.2</cluster_ip>

</node>

</cluster>

</pre></div></div>

<p>As stated before, each of the above properties can be defined at the cluster level, in which case it applies to all the nodes in the system. Each property can also be defined at a node level.</p>

813

<p>Once we have formed the cluster XML file, we can validate the configuration by doing the following:</p>

<pre> managix validate -c rainbow_cluster/rainbow.xml

818

</pre></div></div>

819

<p>This will verify the contents of the file, and also attempt to ssh to each node in the cluster to ensure that password-less SSH is configured correctly. You may see output like</p>

<pre> The authenticity of host '192.168.100.1 (192.168.100.1)' can't be established.

824

RSA key fingerprint is 89:80:31:1f:be:51:16:d7:2b:f5:e0:b3:2c:bd:83:94.

825

Are you sure you want to continue connecting (yes/no)?

826

</pre></div></div>

827

<p>and this output may be repeated for each node in the cluster. Answer “yes” each time.</p>

828

<p>If the final output contains the following lines (possibly separated by the RSA prompts mentione above):</p>

<pre> INFO: Environment [OK]

833

INFO: Cluster configuration [OK]

834

</pre></div></div>

835

<p>it means that the XML configuration file is correct!</p></div>

836

837

<h3><a name="Step_3:_Configuring_Managix"></a>Step (3): Configuring Managix</h3>

838

<p>Managix uses a configuration XML file at <tt>$MANAGIX_HOME/conf/managix-conf.xml</tt> to configure its own properties, such as its Zookeeper service. We can use the <tt>configure</tt> command to auto-generate this configuration file:</p>

<pre> machineA> managix configure

843

</pre></div></div>

844

<p>We use the <tt>validate</tt> command to validate the Managix configuration. To do so, execute the following.</p>

<pre> machineA> managix validate

849

INFO: Environment [OK]

850

INFO: Managix Configuration [OK]

851

</pre></div></div>

852

<p>Note that the <tt>configure</tt> command also generates a cluster configuration XML file at $MANAGIX_HOME/clusters/local/local.xml. This file is not needed in the case of a cluster of machines.</p></div>

853

854

<h3><a name="Step_4:_Creating_an_AsterixDB_instance"></a>Step (4): Creating an AsterixDB instance</h3>

855

<p>Now that we have configured Managix, we shall next create an AsterixDB instance, which is identified by a unique name and is created using the <tt>create</tt> command. The usage description for the <tt>create</tt> command can be obtained by executing the following:</p>

<pre> machineA> managix help -cmd create

860

861

Creates an AsterixDB instance with a specified name. Post creation, the instance is in ACTIVE state,

862

indicating its availability for executing statements/queries.

863

Usage arguments/options:

864

-n Name of the AsterixDB instance.

865

-c Path to the cluster configuration file

866

</pre></div></div>

867

<p>We shall now use the <tt>create</tt> command to create an AsterixDB instance called “rainbow_asterix”. In doing so, we shall use the cluster configuration file that was auto-generated by Managix.</p>

<pre> machineA> managix create -n rainbow_asterix -c clusters/rainbow.xml

872

</pre></div></div>

873

<p>If the response message does not have warning, then Congratulations! You have successfully installed AsterixDB on this cluster of machines!</p>

874

<p>Please refer to the section <a href="#Section_4:_Managing_the_Lifecycle_of_an_AsterixDB_Instance">Managing the Lifecycle of an AsterixDB Instance</a> for a detailed description on the set of available commands/operations that let you manage the lifecycle of an AsterixDB instance. Note that the output of the commands varies with the cluster definition and may not apply to the cluster specification you built above.</p></div></div>

875

876

<h2><a name="Section_4:_Managing_the_Lifecycle_of_an_AsterixDB_Instance_Back_to_TOC"></a><a name="Section4ManagingTheLifecycleOfAnAsterixDBInstance" id="Section4ManagingTheLifecycleOfAnAsterixDBInstance">Section 4: Managing the Lifecycle of an AsterixDB Instance</a> <font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

877

<p>Now that we have an AsterixDB instance running, let us use Managix to manage the instance’s lifecycle. Managix provides the following set of commands/operations:</p>

878

879

880

<h4><a name="Managix_Commands"></a>Managix Commands</h4>

<td>Command</td>

<td>Description</td></tr>

887

888

889

<td><a href="#Creating_an_AsterixDB_instance">create</a></td>

890

<td>Creates a new asterix instance.</td></tr>

891

892

893

<td><a href="#Describe_Command">describe</a></td>

894

<td>Describes an existing asterix instance.</td></tr>

<td>Stops an asterix instance that is in the ACTIVE state.</td></tr>

899

900

901

<td><a href="#Start_Command">start</a></td>

902

<td>Starts an AsterixDB instance.</td></tr>

903

904

905

<td><a href="#Backup_Command">backup</a></td>

906

<td>Creates a backup for an existing AsterixDB instance.</td></tr>

907

908

909

<td><a href="#Restore_Command">restore</a></td>

910

<td>Restores an AsterixDB instance.</td></tr>

911

912

913

<td><a href="#Delete_Command">delete</a></td>

914

<td>Deletes an AsterixDB instance.</td></tr>

915

916

917

<td><a href="#Configuring_Managix">validate</a></td>

918

<td>Validates the installer/cluster configuration.</td></tr>

919

920

921

<td><a href="#Configuring_Managix">configure</a></td>

922

<td>Auto generates a configuration for an AsterixDB instance.</td></tr>

<td>Produces a zip archive containing log files from each node in an AsterixDB instance.</td></tr>

927

928

929

<td><a href="#Shutdown_Command">shutdown</a></td>

930

<td>Shuts down the installer service.</td></tr>

931

</table>

932

<p>You may obtain the above listing by simply executing ‘managix’ :</p>

<pre> $ managix

</pre></div></div>

<p>We already talked about <tt>create</tt> and <tt>validate</tt> commands. We shall next explain the rest of the commands listed above. We also provide sample output messages of these commands assuming we are running an AsterixDB instance on a single machine.</p>

939

940

<h5><a name="Describe_Command"></a>Describe Command</h5>

941

<p>The <tt>describe</tt> command provides information about an AsterixDB instance. The usage can be looked up by executing the following:</p>

<pre> $ managix help -cmd describe

946

947

Provides information about an AsterixDB instance.

948

The following options are available:

949

[-n] Name of the AsterixDB instance.

950

[-admin] Provides a detailed description

951

</pre></div></div>

952

<p>The brackets indicate optional flags.</p>

953

<p>The output of the <tt>describe</tt> command when used without the <tt>admin</tt> flag contains minimal information and is similar to the output of the <tt>create</tt> command. Let us try running the describe command in “admin” mode.</p>

<pre> $ managix describe -n my_asterix -admin

958

INFO: Name:my_asterix

959

Created:Thu Mar 07 19:07:00 PST 2013

960

Web-Url:http://127.0.0.1:19001

961

State:ACTIVE

962

Master node:master:127.0.0.1

963

node1:127.0.0.1

964

965

Asterix version:0.0.5

966

Asterix Configuration

967

output_dir = /tmp/asterix_output/

968

Metadata Node:node1

969

Processes

970

NC at 127.0.0.1 [ 22195 ]

971

CC at 127.0.0.1 [ 22161 ]

972

973

Asterix Configuration

974

nc.java.opts :-Xmx1024m

975

cc.java.opts :-Xmx1024m

976

storage.buffercache.pagesize :32768

977

storage.buffercache.size :33554432

978

storage.buffercache.maxopenfiles :214748364

979

storage.memorycomponent.pagesize :32768

980

storage.memorycomponent.numpages :1024

981

storage.memorycomponent.globalbudget :536870192

982

storage.lsm.mergethreshold :3

983

storage.lsm.bloomfilter.falsepositiverate:0.01

984

txn.log.buffer.numpages :8

985

txn.log.buffer.pagesize :131072

986

txn.log.partitionsize :2147483648

987

txn.log.disksectorsize :4096

988

txn.log.groupcommitinterval :1

989

txn.log.checkpoint.lsnthreshold :67108864

990

txn.log.checkpoint.pollfrequency :120

991

txn.log.checkpoint.history :0

992

txn.lock.escalationthreshold :1000

993

txn.lock.shrinktimer :5000

994

txn.lock.timeout.waitthreshold :60000

995

txn.lock.timeout.sweepthreshold :10000

996

compiler.sortmemory :33554432

997

compiler.joinmemory :33554432

998

compiler.framesize :32768

web.port :19001

api.port :19002

log.level :INFO

</pre></div></div>

<p>As seen above, the instance ‘my_asterix’ is configured such that all processes running at the localhost (127.0.0.1). The process id for each process (JVM) is shown next to it.</p></div>

1004

1005

<h5><a name="Stop_Command"></a>Stop Command</h5>

1006

<p>The <tt>stop</tt> command can be used for shutting down an AsterixDB instance. After that, the instance is unavailable for executing queries. The usage can be looked up by executing the following.</p>

<pre> $ managix help -cmd stop

1011

1012

Shuts an AsterixDB instance that is in ACTIVE state. After executing the stop command, the AsterixDB instance transits

1013

to the INACTIVE state, indicating that it is no longer available for executing queries.

1014

1015

Available arguments/options

1016

-n name of the AsterixDB instance.

1017

</pre></div></div>

1018

<p>To stop the AsterixDB instance.</p>

<pre> $ managix stop -n my_asterix

1023

INFO: Stopped AsterixDB instance: my_asterix

1024

1025

1026

$ managix describe -n my_asterix

1027

INFO: Name: my_asterix

1028

Created:Thu Mar 07 19:07:00 PST 2013

1029

Web-Url:http://127.0.0.1:19001

1030

State:INACTIVE (Fri Mar 08 09:49:00 PST 2013)

1031

</pre></div></div></div>

1032

1033

<h5><a name="Start_Command"></a>Start Command</h5>

1034

<p>The <tt>start</tt> command starts an AsterixDB instance that is in the INACTIVE state. The usage can be looked up by executing the following:</p>

<pre> $ managix help -cmd start

1039

1040

Starts an AsterixDB instance that is in INACTIVE state. After executing the start command, the AsterixDB instance transits to the ACTIVE state, indicating that it is now available for executing statements/queries.

1041

1042

Available arguments/options

1043

-n name of the AsterixDB instance.

1044

</pre></div></div>

1045

<p>Let us now start the AsterixDB instance.</p>

<pre> $ managix start -n my_asterix

1050

INFO: Name:my_asterix

1051

Created:Thu Mar 07 19:07:00 PST 2013

1052

Web-Url:http://127.0.0.1:19001

1053

State:ACTIVE (Fri Mar 08 09:49:00 PST 2013)

1054

</pre></div></div></div>

1055

1056

<h5><a name="Backup_Command"></a>Backup Command</h5>

1057

<p>The backup command allows you to take a backup of the data stored with an AsterixDB instance. The backup can be taken on the local file system or on an HDFS instance. In either case, the snapshots are stored under a backup directory. You need to make sure the backup directory has appropriate read/write permissions. Configuring settings for backup can be found inside the Managix’s configuration file located at <tt>$MANAGIX_HOME/conf/managix-conf.xml</tt>.</p>

1058

<p><i>Configuring backup on the local file system</i></p>

1059

<p>We need to provide a path to a backup directory on the local file system. The backup directory can be configured be editing the Managix configuration XML, found at <tt>$MANAGIX_HOME/conf/managix-conf.xml</tt>.</p>

<backupDir>Provide path to the backup directory here</backupDir>

1065

</backup>

1066

</pre></div></div>

1067

<p>Prior to taking a backup of an AsterixDB instance, it is required for the instance to be in the INACTIVE state. We do so by using the <tt>stop</tt> command, as shown below:</p>

<pre> $ managix stop -n my_asterix

1072

INFO: Stopped AsterixDB instance: my_asterix

1073

</pre></div></div>

1074

<p>We can now take the backup by executing the following:</p>

<pre> $ managix backup -n my_asterix

1079

INFO: my_asterix backed up 0_Fri Mar 08 16:16:34 PST 2013 (LOCAL)

1080

</pre></div></div>

1081

<p><i>Configuring backup on an HDFS instance</i></p>

1082

<p>To configure a backup to be taken on an HDFS instance, we need to provide required information about the running HDFS instance. This information includes the HDFS version and the HDFS url. Simply edit the Managix configuration file and provide the required information.</p>

<backupDir>Provide path to the backup directory here</backupDir>

<hdfs>

</hdfs>

</backup>

</pre></div></div>

<p>A sample output when a backup is taken on an HDFS is shown below:</p>

<pre> $ managix backup -n my_asterix

1099

INFO: my_asterix backed up 1_Fri Mar 08 17:10:38 PST 2013 (HDFS)

1100

</pre></div></div>

1101

<p>Each time we take a backup, we are provided with a unique id (a monotonically increasing value starting with 0). This id is required when we need to restore from a previously taken backup. Information about all available backup snapshots can be obtained by using the <tt>describe</tt> command in the admin mode, as shown below:</p>

<pre> $ managix describe -n my_asterix -admin

1106

INFO: Name:my_asterix

1107

Created:Fri Mar 08 15:11:12 PST 2013

1108

Web-Url:http://127.0.0.1:19001

1109

State:INACTIVE (Fri Mar 08 16:14:20 PST 2013)

1110

Master node:master:127.0.0.1

1111

node1:127.0.0.1

1112

1113

Backup:0 created at Fri Mar 08 16:16:34 PST 2013 (LOCAL)

1114

Backup:1 created at Fri Mar 08 17:10:38 PST 2013 (HDFS)

1115

1116

Asterix version:0.0.5

1117

Asterix Configuration

Metadata Node:node1

Processes

</pre></div></div>

<p>The above output shows the available backup identified by it’s id (0). We shall next describe the method for restoring an AsterixDB instance from a backup snapshot.</p></div>

1122

1123

<h5><a name="Restore_Command"></a>Restore Command</h5>

1124

<p>The <tt>restore</tt> command allows you to restore an AsterixDB instance’s data from a previously taken backup. The usage description can be obtained as follows:</p>

<pre> $ managix help -cmd restore

1129

1130

Restores an AsterixDB instance's data from a previously taken backup.

1131

Available arguments/options

1132

1133

-n name of the AsterixDB instance

1134

-b id of the backup snapshot

1135

</pre></div></div>

1136

<p>The following command restores our AsterixDB instance from the backup snapshot identified by the id (0). Prior to restoring an instance from a backup, it is required that the instance is in the INACTIVE state.</p>

<pre> $ managix restore -n my_asterix -b 0

1141

INFO: AsterixDB instance: my_asterix has been restored from backup

1142

</pre></div></div>

1143

<p>You can start the AsterixDB instance by using the start command.</p></div>

1144

1145

<h5><a name="Log_Command"></a>Log Command</h5>

1146

<p>The <tt>log</tt> command allows you to collect the log files coresponding to each node of an AsterixDB instance into a zip archive. The zip archive is produced on the local file system of the machine running managix. </p>

<pre> $ managix help -cmd log

1151

1152

Creates a zip archive containing log files corresponding to each worker node (NC) and the master (CC) for an AsterixDB instance

1153

1154

Available arguments/options

1155

-n name of the AsterixDB instance.

1156

-d destination directory for producing the zip archive. Defaults to $MANAGIX_HOME/logdump.

1157

</pre></div></div>

1158

<p>The following is an example showing the use of the log command. </p>

<pre> $ managix log -n my_asterix -d /Users/joe/logdump

1163

INFO: Log zip archive created at /Users/joe/logdump/log_Thu_Jun_06_00:53:51_PDT_2013.zip

1164

</pre></div></div></div>

1165

1166

<h5><a name="Delete_Command"></a>Delete Command</h5>

1167

<p>As the name suggests, the <tt>delete</tt> command permanently removes an AsterixDB instance by cleaning up all associated data/artifacts. The usage can be looked up by executing the following:</p>

<pre> $ managix help -cmd delete

1172

Permanently deletes an AsterixDB instance. The instance must be in the INACTIVE state.

1173

1174

Available arguments/options

1175

-n name of the AsterixDB instance.

1176

1177

1178

$ managix delete -n my_asterix

1179

INFO: AsterixDB instance my_asterix deleted.

1180

</pre></div></div></div>

1181

1182

<h5><a name="Shutdown_Command"></a>Shutdown Command</h5>

1183

<p>Managix uses Zookeeper service for storing all information about created AsterixDB instances. The Zookeeper service runs in the background and can be shut down using the <tt>shutdown</tt> command.</p>

<pre> $ managix shutdown

1188

</pre></div></div></div>

1189

1190

<h5><a name="Help_Command"></a>Help Command</h5>

1191

<p>The <tt>help</tt> command provides a usage description of a Managix command.</p>

<pre> $ managix help -cmd <command name>

1196

</pre></div></div>

1197

<p>As an example, for looking up the help for the <tt>configure</tt> command, execute the following</p>

<pre> $ managix help -cmd configure

1202

1203

Auto-generates the AsterixDB installer configruation settings and AsterixDB cluster

1204

configuration settings for a single node setup.

1205

</pre></div></div></div></div></div></div>

1206

1207

<h2><a name="Section_5:_Frequently_Asked_Questions_Back_to_TOC"></a><a name="Section5FAQ" id="Section5FAQ">Section 5: Frequently Asked Questions</a> <font size="4"><a href="#toc">[Back to TOC]</a></font></h2>

<h5><a name="Question"></a>Question</h5>

1212

<p>What happens if a machine acting as a node in the Asterix cluster becomes unreachable for some reason (network partition/machine failure) ?</p></div>

1213

1214

<h5><a name="Answer"></a>Answer</h5>

1215

<p>When a node leaves the Asterix cluster, the AsterixDB instance transits to an ‘UNUSABLE’ state, indicating that it is no longer available for serving queries. To know which set of node(s) left the cluster, run the describe command with -admin flag. </p>

<pre> $ $MANAGIX_HOME/bin/managix describe -n <name of the AsterixDB instance>-admin

1220

</pre></div></div>

1221

<p>Above command will show the state of AsterixDB instance and list the set of nodes that have left the cluster. </p>

1222

<p>The failed node must be brought back to re-join the cluster. Once done, you may bring back the instance to an ‘ACTIVE’ state by executing the following sequence. </p>

1223

<p>1) Get rid of the Asterix processes running on the nodes in the cluster:-</p>

<pre> managix stop -n my_asterix

1228

</pre></div></div>

1229

<p>The processes associated with the instance are terminated and the instance moves to the INACTIVE state.</p>

1230

<p>2) Start the AsterixDB instance using the start command.</p>

<pre> managix start -n <name of your AsterixDB instance>

1235

</pre></div></div></div>

1236

1237

<h5><a name="Question"></a>Question</h5>

1238

<p>Do I need to create all the directories/paths I put into the cluster configuration XML ?</p></div>

1239

1240

<h5><a name="Answer"></a>Answer</h5>

1241

<p>Managix will create a path if it is not existing. It does so using the user account mentioned in the cluster configuration xml. Please ensure that the user account has appropriate permissions for creating the missing paths. </p></div>

1242

1243

<h5><a name="Question"></a>Question</h5>

1244

<p>Should MANAGIX_HOME be on the network file system (NFS) ?</p></div>

1245

1246

<h5><a name="Answer"></a>Answer</h5>

1247

<p>It is recommended that MANAGIX_HOME is not on the NFS. Managix produces artifacts/logs on disk which are not required to be shared. As such an overhead in creating the artifacts/logs on the NFS should be avoided.</p></div>

1248

1249

<h5><a name="Question"></a>Question</h5>

1250

<p>How do we change the underlying code (apply a code patch) for an ‘active’ asterix instance?</p></div>

1251

1252

<h5><a name="Answer"></a>Answer</h5>

1253

<p>At times, end-user (particularly asterix developer) may run into the need to altering the underlying code that is being run by an asterix instance. In the current version of managix, this can be achieved as follows:-</p>

1254

<p>Assume that you have an ‘active’ instance by the name a1 that is running version v1 of asterix. You have a revised version of asterix - v2 that fixes some bug(s).</p>

1255

<p>To upgrade asterix from v1 to v2:-</p>

1256

<p>step 1) managix stop -n a1</p>

1257

<p>step 2) managix shutdown</p>

1258

<p>step 3) copy asterix-server zip (version v2) to asterix/</p>

1259

<p>step 4) managix start -n a1</p>

1260

<p>a1 now is running on version v2.</p>

1261

<p>Limitations:-</p>

1262

<p>a) Obviously this wont work in a situation where v2 has made a change that is incompatible with earlier version, such altering schema.</p>

1263

<p>b) A change in asterix zip applies to all existing instances (after a restart) and subsequent instances that user creates.</p></div></div></div></div>

</div>

</div>

</div>

<hr/>