diff --git a/asterix-doc/src/site/markdown/feeds/tutorial.md b/asterix-doc/src/site/markdown/feeds/tutorial.md
index 4894862..16da5aa 100644
--- a/asterix-doc/src/site/markdown/feeds/tutorial.md
+++ b/asterix-doc/src/site/markdown/feeds/tutorial.md
@@ -3,21 +3,17 @@
 ## <a id="#toc">Table of Contents</a> ##
 
 * [Introduction](#Introduction)
-  * [Data Feed Basics](#DataFeedBasics)
-    * [Collecting Data: Feed Adaptors](#FeedAdaptors)
-    * [Preprocessing Collected Data](#PreprocessingCollectedData)
-  * [Creating an External UDF](#CreatingAnExternalUDF)
-  * [Installing an AsterixDB Library](#InstallingAnAsterixDBLibrary)
-
+* [Feed Adaptors](#FeedAdaptors)
+* [Feed Policies](#FeedPolicies)
 
 ## <a name="Introduction">Introduction</a>  ##
 
-In this document, we describe the support for data ingestion in AsterixDB, an open-source Big Data Management System (BDMS) that provides a platform for storage and analysis of large volumes of semi-structured data. Data feeds are a new mechanism for having continuous data arrive into a BDMS from external sources and incrementally populate a persisted dataset and associated indexes. We add a new BDMS architectural component, called a data feed, that makes a Big Data system the caretaker for functionality that
-used to live outside, and we show how it improves users’ lives and system performance.
+In this document, we describe the support for data ingestion in
+AsterixDB.  Data feeds are a new mechanism for having continuous data arrive into a BDMS from external sources and incrementally populate a persisted dataset and associated indexes. We add a new BDMS architectural component, called a data feed, that makes a Big Data system the caretaker for functionality that
+used to live outside, and we show how it improves users' lives and system performance.
 
-## <a name="DataFeedBasics">Data Feed Basics</a>  ##
+## <a name="FeedAdaptors">Feed Adaptors</a>  ##
 
-####Collecting Data: Feed Adaptors####
 The functionality of establishing a connection with a data source
 and receiving, parsing and translating its data into ADM records
 (for storage inside AsterixDB) is contained in a feed adaptor. A
@@ -28,25 +24,25 @@
 may operate in a push or a pull mode. Push mode involves just
 one initial request by the adaptor to the data source for setting up
 the connection. Once a connection is authorized, the data source
-“pushes” data to the adaptor without any subsequent requests by
+"pushes" data to the adaptor without any subsequent requests by
 the adaptor. In contrast, when operating in a pull mode, the adaptor
 makes a separate request each time to receive data.
 AsterixDB currently provides built-in adaptors for several popular
-data sources—Twitter, CNN, and RSS feeds. AsterixDB additionally
+data sources such as Twitter, CNN, and RSS feeds. AsterixDB additionally
 provides a generic socket-based adaptor that can be used
-to ingest data that is directed at a prescribed socket.
+to ingest data that is directed at a prescribed socket. 
 
 
 In this tutorial, we shall describe building two example data ingestion pipelines that cover the popular scenario of ingesting data from (a) Twitter and (b) RSS Feed source.
 
-####Ingesting Twitter Stream
+####Ingesting Twitter Stream 
 We shall use the built-in push-based Twitter adaptor.
-As a pre-requisite, we must define a Tweet using the AsterixDB Data Model (ADM) and the AsterixDB Query Language (AQL). Given below are the type definition in AQL that create a Tweet datatype which is representative of a real tweet as obtained from Twitter.
+As a pre-requisite, we must define a Tweet using the AsterixDB Data Model (ADM) and the AsterixDB Query Language (AQL). Given below are the type definition in AQL that create a Tweet datatype which is representative of a real tweet as obtained from Twitter.  
 
         create dataverse feeds;
         use dataverse feeds;
 
-        create type TwitterUser  if not exists as open{
+        create type TwitterUser if not exists as open{
             screen_name: string,
             language: string,
             friends_count: int32,
@@ -63,157 +59,46 @@
             message_text:string
         };
 
-        create dataset Tweets (Tweet)
+	    create dataset Tweets (Tweet)
         primary key id;
 
-We also create a dataset that we shall use to persist the tweets in AsterixDB.
-Next we make use of the create feed AQL statement to define our example data feed.
+We also create a dataset that we shall use to persist the tweets in AsterixDB. 
+Next we make use of the `create feed` AQL statement to define our example data feed. 
 
 #####Using the "push_twitter" feed adapter#####
-The push_twitter adaptor requires setting up an application account with Twitter. To retrieve
-tweets, Twitter requires registering an application with Twitter. Registration involves providing a name and a brief description for the application. Each application has an associated OAuth authentication credential that includes OAuth keys and tokens. Accessing the
+The "push_twitter" adaptor requires setting up an application account with Twitter. To retrieve
+tweets, Twitter requires registering an application with Twitter. Registration involves providing a name and a brief description for the application. Each application has an associated OAuth authentication credential that includes OAuth keys and tokens. Accessing the 
 Twitter API requires providing the following.
 1. Consumer Key (API Key)
 2. Consumer Secret (API Secret)
 3. Access Token
 4. Access Token Secret
 
+The "push_twitter" adaptor takes as configuration the above mentioned
+parameters. End users are required to obtain the above authentication credentials prior to using the "push_twitter" adaptor. For further information on obtaining OAuth keys and tokens and registering an application with Twitter, please visit http://apps.twitter.com 
 
-The "push_twitter" adaptor takes as configuration the above mentioned parameters. End-user(s) are required to obtain the above authentication credentials prior to using the "push_twitter" adaptor. For further information on obtaining OAuth keys and tokens and registering an application with Twitter, please visit http://apps.twitter.com
+Given below is an example AQL statement that creates a feed called "TwitterFeed" by using the 
+"push_twitter" adaptor. 
 
-Given below is an example AQL statement that creates a feed - TwitterFeed by using the
-"push_twitter" adaptor.
-
-
+        use dataverse feeds;
 
         create feed TwitterFeed if not exists using "push_twitter"
         (("type-name"="Tweet"),
-         ("consumer.key"="************"),
+         ("consumer.key"="************"),  
          ("consumer.secret"="**************"),
-         ("access.token"="**********"),
+         ("access.token"="**********"),  
          ("access.token.secret"="*************"));
 
-It is required that the above authentication parameters are provided valid values.
-Note that the create feed statement does not initiate the flow of data from Twitter into our AsterixDB instance. Instead, the create feed statement only results in registering the feed with AsterixDB. The flow of data along a feed is initiated when it is connected
+It is required that the above authentication parameters are provided valid values. 
+Note that the `create feed` statement does not initiate the flow of data from Twitter into our AsterixDB instance. Instead, the `create feed` statement only results in registering the feed with AsterixDB. The flow of data along a feed is initiated when it is connected
 to a target dataset using the connect feed statement (which we shall revisit later).
 
 
-####Ingesting an RSS Feed
-RSS (Rich Site Summary); originally RDF Site Summary; often called Really Simple Syndication, uses a family of standard web feed formats to publish frequently updated information: blog entries, news headlines, audio, video. An RSS document (called "feed", "web feed", or "channel") includes full or summarized text, and metadata, like publishing date and author's name. RSS feeds enable publishers to syndicate data automatically.
-
-
-#####Using the "rss_feed" feed adapter#####
-AsterixDB provides a built-in feed adaptor that allows retrieving data given a collection of RSS end point URLs. As observed in the case of ingesting tweets, it is required to model an RSS data item using AQL.
-
-        create dataverse feeds if not exists;
-        use dataverse feeds;
-
-        create type Rss  if not exists as open{
-            id: string,
-            title: string,
-            description: string,
-            link: string
-        };
-
-        create dataset RssDataset (Rss)
-        primary key id;
-
-
-Next, we define an RSS feed using our built-in adaptor "rss_feed".
-
-        create feed my_feed using
-        rss_feed (
-           ("type-name"="Rss"),
-           ("url"="http://rss.cnn.com/rss/edition.rss")
-        );
-
-In the above definition, the configuration parameter "url" can be a comma separated list that reflects a collection of RSS URLs, where each URL corresponds to an RSS endpoint or a RSS feed.
-The "rss_adaptor" retrieves data from each of the specified RSS URLs (comma separated values) in parallel.
-
-
-So far, we have discussed the mechanism for retrieving data from the external world into the AsterixDB system. However, the arriving data may require certain pre-processing prior to being persisted in AsterixDB storage. Next, we discuss how the arriving data can be pre-processed.
-
-
-
-## <a id="PreprocessingCollectedData">Preprocessing Collected Data</a> ###
-A feed definition may optionally include the specification of a
-user-defined function that is to be applied to each feed record prior
-to persistence. Examples of pre-processing might include adding
-attributes, filtering out records, sampling, sentiment analysis, feature
-extraction, etc. The pre-processing is expressed as a userdefined
-function (UDF) that can be defined in AQL or in a programming
-language like Java. An AQL UDF is a good fit when
-pre-processing a record requires the result of a query (join or aggregate)
-over data contained in AsterixDB datasets. More sophisticated
-processing such as sentiment analysis of text is better handled
-by providing a Java UDF. A Java UDF has an initialization phase
-that allows the UDF to access any resources it may need to initialize
-itself prior to being used in a data flow. It is assumed by the
-AsterixDB compiler to be stateless and thus usable as an embarassingly
-parallel black box. In constrast, the AsterixDB compiler can
-reason about an AQL UDF and involve the use of indexes during
-its invocation.
-
-We consider an example transformation of a raw tweet into its lightweight version - ProcessedTweet - which is defined next.
-
-        create type ProcessedTweet if not exists as open {
-            id: string,
-            user_name:string,
-            location:point,
-            created_at:string,
-            message_text:string,
-            country: string,
-            topics: [string]
-        };
-
-
-The processing required in transforming a collected tweet to its lighter version (of type ProcessedTweet) involves extracting the topics or hash-tags (if any) in a tweet
-and collecting them in the referred-topics attribute for the tweet.
-Additionally, the latitude and longitude values (doubles) are combined into the spatial point type. Note that spatial data types are considered as first class citizens that come with the support for creating indexes. Next we show a revised version of our example TwitterFeed that involves the use of a UDF. We assume that the UDF that contains the transformation logic into a ProcessedTweet is avaialable as a Java UDF inside an AsterixDB library named 'testlib'. We defer the writing of a Java UDF and its installation as part of an AsterixDB library to a later section of this document.
-
-        create feed ProcessedTwitterFeed if not exists
-        using "push_twitter"
-        (("type-name"="Tweet"));
-        apply function testlib#processRawTweet;
-
-Note that a feed adaptor and a UDF act as pluggable components. These
-contribute towards providing a generic ‘plug-and-play‘ model where
-custom implementations can be provided to cater to specific requirements.
-
-####Building a Cascade Network of Feeds####
-Multiple high-level applications may wish to consume the data
-ingested from a data feed. Each such application might perceive the
-feed in a different way and require the arriving data to be processed
-and/or persisted differently. Building a separate flow of data from
-the external source for each application is wasteful of resources as
-the pre-processing or transformations required by each application
-might overlap and could be done together in an incremental fashion
-to avoid redundancy. A single flow of data from the external source
-could provide data for multiple applications. To achieve this, we
-introduce the notion of primary and secondary feeds in AsterixDB.
-
-A feed in AsterixDB is considered to be a primary feed if it gets
-its data from an external data source. The records contained in a
-feed (subsequent to any pre-processing) are directed to a designated
-AsterixDB dataset. Alternatively or additionally, these records can
-be used to derive other feeds known as secondary feeds. A secondary
-feed is similar to its parent feed in every other aspect; it can
-have an associated UDF to allow for any subsequent processing,
-can be persisted into a dataset, and/or can be made to derive other
-secondary feeds to form a cascade network. A primary feed and a
-dependent secondary feed form a hierarchy. As an example, we next show an
-example AQL statement that redefines the previous feed—
-ProcessedTwitterFeed in terms of their
-respective parent feed (TwitterFeed).
-
-        create secondary feed ProcessedTwitterFeed from feed TwitterFeed
-        apply function testlib#addFeatures;
-
-
 ####Lifecycle of a Feed####
-A feed is a logical artifact that is brought to life (i.e. its data flow
-is initiated) only when it is connected to a dataset using the connect
-feed AQL statement (Figure 7). Subsequent to a connect feed
+
+A feed is a logical artifact that is brought to life (i.e., its data flow
+is initiated) only when it is connected to a dataset using the `connect
+feed` AQL statement. Subsequent to a `connect feed`
 statement, the feed is said to be in the connected state. Multiple
 feeds can simultaneously be connected to a dataset such that the
 contents of the dataset represent the union of the connected feeds.
@@ -226,42 +111,98 @@
 and connected to a dataset at any time without impeding/interrupting
 the flow of data along a connected ancestor feed.
 
-        connect feed ProcessedTwitterFeed to
-        dataset ProcessedTweets ;
+        use dataverse feeds;
 
-        disconnect feed ProcessedTwitterFeed from
-        dataset ProcessedTweets ;
+        connect feed TwitterFeed to dataset Tweets;
 
-The connect feed statement above directs AsterixDB to persist
-the ProcessedTwitterFeed feed in the ProcessedTweets dataset.
+The `connect feed` statement above directs AsterixDB to persist
+the `TwitterFeed` feed in the `Tweets` dataset.
 If it is required (by the high-level application) to also retain the raw
 tweets obtained from Twitter, the end user may additionally choose
-to connect TwitterFeed to a (different) dataset. Having a set of primary
-and secondary feeds offers the flexibility to do so. Let us
-assume that the application needs to persist TwitterFeed and that,
-to do so, the end user makes another use of the connect feed statement.
-A logical view of the continuous flow of data established by
-connecting the feeds to their respective target datasets is shown in
-Figure 8.
+to connect TwitterFeed to a different dataset. 
+
+Let the feed run for a minute, then run the following query to see the
+latest tweets that are stored into the data set.
+
+        use dataverse feeds;
+
+        for $i in dataset Tweets limit 10 return $i;
+
 
 The flow of data from a feed into a dataset can be terminated
-explicitly by use of the disconnect feed statement.
+explicitly by use of the `disconnect feed` statement.
 Disconnecting a feed from a particular dataset does not interrupt
 the flow of data from the feed to any other dataset(s), nor does it
 impact other connected feeds in the lineage.
 
-####Policies for Feed Ingestion####
+        use dataverse feeds;
+
+        disconnect feed TwitterFeed from dataset Tweets;
+
+####Ingesting an RSS Feed
+
+RSS (Rich Site Summary), originally RDF Site Summary and often called Really Simple Syndication, uses a family of standard web feed formats to publish frequently updated information: blog entries, news headlines, audio, video. An RSS document (called "feed", "web feed", or "channel") includes full or summarized text, and metadata, like publishing date and author's name. RSS feeds enable publishers to syndicate data automatically. 
+
+
+#####Using the "rss_feed" feed adapter#####
+AsterixDB provides a built-in feed adaptor that allows retrieving data given a collection of RSS end point URLs. As observed in the case of ingesting tweets, it is required to model an RSS data item using AQL.  
+
+        use dataverse feeds;
+
+        create type Rss if not exists as open {
+        	id: string,
+        	title: string,
+        	description: string,
+        	link: string
+        };
+
+        create dataset RssDataset (Rss)
+		primary key id; 
+
+Next, we define an RSS feed using our built-in adaptor "rss_feed". 
+
+        use dataverse feeds;
+
+        create feed my_feed using 
+	    rss_feed (
+	       ("type-name"="Rss"),
+	       ("url"="http://rss.cnn.com/rss/edition.rss")
+		);
+
+In the above definition, the configuration parameter "url" can be a comma-separated list that reflects a collection of RSS URLs, where each URL corresponds to an RSS endpoint or a RSS feed. 
+The "rss_adaptor" retrieves data from each of the specified RSS URLs (comma separated values) in parallel. 
+
+The following statements connect the feed into the `RssDataset`:
+
+        use dataverse feeds;
+
+        connect feed my_feed to dataset RssDataset;
+
+The following statements show the latest data from the data set, and
+disconnect the feed from the data set.
+
+        use dataverse feeds;
+
+        for $i in dataset RssDataset limit 10 return $i;
+
+        disconnect feed my_feed from dataset RssDataset;
+
+AsterixDB also allows multiple feeds to be connected to form a cascade
+network to process data.
+
+## <a name="FeedPolicies">Policies for Feed Ingestion</a>  ##
+
 Multiple feeds may be concurrently operational on an AsterixDB
 cluster, each competing for resources (CPU cycles, network bandwidth,
 disk IO) to maintain pace with their respective data sources.
-A data management system must be able to manage a set of concurrent
+As a data management system, AsterixDB is able to manage a set of concurrent
 feeds and make dynamic decisions related to the allocation of
 resources, resolving resource bottlenecks and the handling of failures.
 Each feed has its own set of constraints, influenced largely
-by the nature of its data source and the application(s) that intend
+by the nature of its data source and the applications that intend
 to consume and process the ingested data. Consider an application
 that intends to discover the trending topics on Twitter by analyzing
-the ProcessedTwitterFeed feed. Losing a few tweets may be
+tweets that are being processed. Losing a few tweets may be
 acceptable. In contrast, when ingesting from a data source that
 provides a click-stream of ad clicks, losing data would translate to
 a loss of revenue for an application that tracks revenue by charging
@@ -271,177 +212,37 @@
 policy that is expressed as a collection of parameters and associated
 values. An ingestion policy dictates the runtime behavior of
 the feed in response to resource bottlenecks and failures. AsterixDB provides
-a list of policy parameters (Table 1) that help customize the
-system’s runtime behavior when handling excess records. AsterixDB
+a list of policy parameters that help customize the
+system's runtime behavior when handling excess records. AsterixDB
 provides a set of built-in policies, each constructed by setting
 appropriate value(s) for the policy parameter(s) from the table below.
 
-
-
-####Policy Parameters
-
+####Policy Parameters 
 
 - *excess.records.spill*: Set to true if records that cannot be processed by an operator for lack of resources (referred to as excess records hereafter) should be persisted to the local disk for deferred processing. (Default: false)
 
-- *excess.records.discard*: Set to true if excess records should be discarded. (Default: false)
+- *excess.records.discard*: Set to true if excess records should be discarded. (Default: false) 
 
-- *excess.records.throttle*: Set to true if rate of arrival of records is required to be reduced in an adaptive manner to prevent having any excess records (Default: false)
+- *excess.records.throttle*: Set to true if rate of arrival of records is required to be reduced in an adaptive manner to prevent having any excess records (Default: false) 
 
-- *excess.records.elastic*: Set to true if the system should attempt to resolve resource bottlenecks by re-structuring and/or rescheduling the feed ingestion pipeline. (Default: false)
+- *excess.records.elastic*: Set to true if the system should attempt to resolve resource bottlenecks by re-structuring and/or rescheduling the feed ingestion pipeline. (Default: false) 
 
-- *recover.soft.failure*:  Set to true if the feed must attempt to survive any runtime exception. A false value permits an early termination of a feed in such an event. (Default: true)
+- *recover.soft.failure*:  Set to true if the feed must attempt to survive any runtime exception. A false value permits an early termination of a feed in such an event. (Default: true) 
 
-- *recover.soft.failure*:  Set to true if the feed must attempt to survive a hardware failures (loss of AsterixDB node(s)). A false value permits the early termination of a feed in the event of a hardware failure (Default: false)
+- *recover.soft.failure*:  Set to true if the feed must attempt to survive a hardware failures (loss of AsterixDB node(s)). A false value permits the early termination of a feed in the event of a hardware failure (Default: false) 
 
-Note that the end user may choose to form a custom policy. E.g.
+Note that the end user may choose to form a custom policy.  For example,
 it is possible in AsterixDB to create a custom policy that spills excess
 records to disk and subsequently resorts to throttling if the
 spillage crosses a configured threshold. In all cases, the desired
-ingestion policy is specified as part of the connect feed statement
-(Figure 9) or else the ‘Basic’ policy will be chosen as the default.
+ingestion policy is specified as part of the `connect feed` statement
+or else the "Basic" policy will be chosen as the default.
 It is worth noting that a feed can be connected to a dataset at any
 time, which is independent from other related feeds in the hierarchy.
 
+        use dataverse feeds;
 
         connect feed TwitterFeed to dataset Tweets
         using policy Basic ;
 
 
-## <a id="WritingAnExternalUDF">Writing an External UDF</a> ###
-
-A Java UDF in AsterixDB is required to implement an prescribe interface. We shall next write a basic UDF that extracts the hashtags contained in the tweet's text and appends each into an unordered list. The list is added as an additional attribute to the tweet to form the augment version - ProcessedTweet.
-
-    package org.apache.asterix.external.library;
-
-    import org.apache.asterix.external.library.java.JObjects.JRecord;
-    import org.apache.asterix.external.library.java.JObjects.JString;
-    import org.apache.asterix.external.library.java.JObjects.JUnorderedList;
-    import org.apache.asterix.external.library.java.JTypeTag;
-
-    public class HashTagsFunction implements IExternalScalarFunction {
-
-    private JUnorderedList list = null;
-
-    @Override
-    public void initialize(IFunctionHelper functionHelper) {
-        list = new JUnorderedList(functionHelper.getObject(JTypeTag.STRING));
-    }
-
-    @Override
-    public void deinitialize() {
-    }
-
-    @Override
-    public void evaluate(IFunctionHelper functionHelper) throws Exception {
-        list.clear();
-        JRecord inputRecord = (JRecord) functionHelper.getArgument(0);
-        JString text = (JString) inputRecord.getValueByName("message_text");
-
-        // extraction of hashtags
-        String[] tokens = text.getValue().split(" ");
-        for (String tk : tokens) {
-            if (tk.startsWith("#")) {
-                JString newField = (JString) functionHelper.getObject(JTypeTag.STRING);
-                newField.setValue(tk);
-                list.add(newField);
-            }
-        }
-
-        // forming the return value - an augmented tweet with an additional attribute - topics
-        JRecord result = (JRecord) functionHelper.getResultObject();
-        result.setField("tweetid", inputRecord.getFields()[0]);
-        result.setField("user", inputRecord.getFields()[1]);
-        result.setField("location_lat", inputRecord.getFields()[2]);
-        result.setField("location_long", inputRecord.getFields()[3]);
-        result.setField("send_time", inputRecord.getFields()[4]);
-        result.setField("message_text", inputRecord.getFields()[5]);
-        result.setField("topics", list);
-
-        functionHelper.setResult(result);
-    }
-
-
-## <a id="CreatingAnAsterixDBLibrary">Creating an AsterixDB Library</a> ###
-
-We need to install our Java UDF so that we may use it in AQL statements/queries. An AsterixDB library has a pre-defined structure which is as follows.
-
-
-- jar file: A jar file that would contain the class files for your UDF source code.
-- library descriptor.xml:  This is a descriptor that provide meta-information about the library.
-
-        <externalLibrary xmlns="library">
-            <language>JAVA</language>
-            <libraryFunctions>
-                <libraryFunction>
-                    <function_type>SCALAR</function_type>
-                    <name>addFeatures</name>
-                    <arguments>Tweet</arguments>
-                    <return_type>ProcessedTweet</return_type>
-                    <definition>org.apache.asterix.external.library.AddHashTagsFactory
-                    </definition>
-                </libraryFunction>
-            </libraryFunctions>
-        </externalLibrary>
-
-
-- lib: other dependency jars
-
-If the Java UDF requires additional dependency jars, you may add them under a "lib" folder is required.
-
-We create a zip bundle that contains the jar file and the library descriptor xml file. The zip would have the following structure.
-
-    $ unzip -l ./tweetlib.zip
-    Archive:  ./tweetlib.zip
-      Length     Date   Time    Name
-     --------    ----   ----    ----
-       760817  04-23-14 17:16   hash-tags.jar
-          405  04-23-14 17:16   tweet.xml
-     --------                   -------
-       761222                   2 files
-
-
-###Installing an AsterixDB Library###
-
-We assume you have followed the [http://asterixdb.ics.uci.edu/documentation/install.html instructions] to set up a running AsterixDB instance. Let us refer your AsterixDB instance by the name "my_asterix".
-
-
-- Step 1: Stop the AsterixDB instance if it is in the ACTIVE state.
-
-        $ managix stop -n my_asterix
-
-
-- Step 2: Install the library using Managix install command. Just to illustrate, we use the help command to look up the syntax
-
-        $ managix help  -cmd install
-        Installs a library to an asterix instance.
-        Options
-        n  Name of Asterix Instance
-        d  Name of the dataverse under which the library will be installed
-        l  Name of the library
-        p  Path to library zip bundle
-
-
-Above is a sample output and explains the usage and the required parameters. Each library has a name and is installed under a dataverse. Recall that we had created a dataverse by the name - "feeds" prior to  creating our datatypes and dataset. We shall name our library - "testlib".
-
-We assume you have a library zip bundle that needs to be installed.
-To install the library, use the Managix install command. An example is shown below.
-
-    $ managix install -n my_asterix -d feeds -l testlib -p <put the absolute path of the library zip bundle here>
-
-You should see the following message:
-
-    INFO: Installed library testlib
-
-We shall next start our AsterixDB instance using the start command as shown below.
-
-    $ managix start -n my_asterix
-
-You may now use the AsterixDB library in AQL statements and queries. To look at the installed artifacts, you may execute the following query at the AsterixDB web-console.
-
-    for $x in dataset Metadata.Function
-    return $x
-
-    for $x in dataset Metadata.Library
-    return $x
-
-Our library is now installed and is ready to be used.